Dreads Message Board
[ Post a Response | Dreads Message Board ]
Re: Tank woes
Posted by Mark W on 7/7/2011, 5:19 pm, in reply to "Re: Tank woes"
Thanks Neil, no dfi tanks at J Browse, D & K may have one but need to call Friday |
Ordered the POR 15 plus an extra stripper for good measure, Frosts did point out though, if I'm having tank painted then wait until they've baked paint or the liner may fall off
Going to see about brazing Friday otherwise it'll be JBWeld and sort in the winter
: Weld or braze the holes up.. i prefer
: brazing but thats just my preference, as
: already stated though it wil soon develop
: more holes if the metal is already thin .
: If you go for a tank liner the only one i
: would recommmend is the POR 15 stuff from
: Frost. I use it in all my tanks. 6 years
: in my Katana now with no problems regarding
: flaking off, but you do have to follow the
: instructions to the rule. I have heard so
: many horror stories about people using other
: products and having nightmares but this
: stuff has been spot on. J BROWSE
: motorcycles has a few 13 tanks but not sure
: if any are DFI ones though.
: For a quick fix to get you going JB WELD is
The administrator reserves the right to remove any unsuitable messages from the board.
Hosted for FREE by Boardhost.
Create your own free message board!