Posted by Fandango
![]()
on 27/5/2011, 6:50 pm
82.36.239.248
I'm setting my ZG with none standard configuraion, (aftermarket exhaust & K+N air cone filters). When adjusting the TP to set the correct mixture, do you 1, measure the output meter readings or 2, connect a colour tune and adjust by turning the TP to get the correct blue spark. Any tips, phone calls will be a help, thank you. Karlos



Message Thread
![]()
« Back to index
The administrator reserves the right to remove any unsuitable messages from the board.