Re: shims

Posted by Hallen on 31/7/2009, 1:46 am, in reply to "shims"
62.20.210.120

I have whatever shim you need,, Just specifey what you whant.. Regards Hallen.. --Previous Message-- : Hi all, has anyone got any shims around 2.20, : i could borrow or buy, i have rebuilt a head : & some of the inlets are to tight to get : a measurements, & i have only got larger : shims regards Jeff :

---

Message Thread: shims - Jeff Broom 28/7/2009, 8:43 am Re: shims - Hallen 31/7/2009, 1:46 am Re: shims - Jeff Broom 31/7/2009, 11:54 am Re: shims - Hallen 3/8/2009, 3:27 am Re: shims - hallen 3/8/2009, 3:30 am Re: shims - Jeff Broom 3/8/2009, 7:54 am Re: shims - Hallen 4/8/2009, 2:57 am « Back to thread

---

Post a Response

The administrator reserves the right to remove any unsuitable messages from the board.