Posted by Ray
on 6/5/2009, 10:05 pm
90.221.20.245
Hi thanx for your feed back on two item's Firstly the DFI heat sensor i was having the DFI flashing on the dash area but i believe it was the connector that was lose i have put new connectors on and heat shrink so no flashing DFI light now, But hard to start and if i start it and let it cut out i cannot start it again plus it is running to rich and of course eratic due to carbon black plugs, secodly I have double checked the petrol tank conectors i will run an amp tester on the wires to see if there is current running on both sides of the fuel tank cable coneectors,
Thanx all i do appreciate your kind advise.
Regard's Ray 01603 610247
Message Thread:
« Back to thread