Posted by phill
on 21/2/2009, 5:12 pm, in reply to "Re: zg1300a3 clutch side crank case"
81.79.110.192
hi andy,im gonna have to take mine off soon,as when i start to refurb her the cases will need rechrome,ive had to much on just lately to start it though,but what i will do is drop the oil and try to get mine off,i will see how it goes.get back to you soon.
kindest regards phill
--Previous Message--
: hi phil, i,ve had another go today but it is
: solid and getting to the stage where i,m
: just going to have to leave it, but i don,t
: like not seeing where my oil level is, the
: bike does not use a lot but saying that i,ve
: only had it from last september and did
: about 1,000 miles and its got 43,000 on now,
: so i dont really know what to do now.
:
: cheers mate.
:
: --Previous Message--
: hi andy,i bought a good quality scraper from
: homebase,probably get the same one from b
: and q they have a blade like a stanley knife
: the blade is about 4 inches long,the blade
: is real thin just right to fit in between
: the gasket and caseing,just tap it in all
: the way round the case and it should start
: to come away,thats what i did on my gsxr and
: it worked.not sure on the z1300 but my
: gixxer had some locating dowels which
: sometimes holds the case quite tight.hope
: this helps.
: kindest regards phill
:
: --Previous Message--
: guys, i,ve been trying to remove my crank
: case
: as to clean the oil glass window but it
: wount budge, i,m going to try some heat on
: it tomorrow and i,ve tryed a slide hammer
: but i dont want to break the case, anybody
: any idea,s please???
:
: thanks, andy.
:
:
:
:
:
Message Thread:
« Back to thread