Posted by steve w on 5/10/2008, 11:50 am, in reply to "Re: carbs servicing"
86.155.99.54
--Previous Message--
: Lads oh Lads oh Lads........please......
:
: Having your carbs refurbed with all new
: parts and internals is ONE thing and VERY
: easy.
:
: Having them then back on the bike and set up
: to YOUR PARTICULAR bike is a completely
: different thing.
:
: Take it from a factory trained K
: mechanic......
:
: All you will get from a refurbished set of
: carbs is a hole in your bank account and
: paying for someones holidays !!!!!
:
: The important "EXPERT" bit is
: setting them up to YOUR bike.
:
: You could be wasting a lot of money to be no
: further on.
: How do YOU know you have a carb problem or
: that the carbs are OK but not set up
: properly ?????????
:
: Pete F
: Up North
:
: --Previous Message--
: Try Z-parts.com They do ultasonic cleaning
: of
: carbs.You can see the difference on the web
: site.
: Have all the parts in stock.I found them
: very helpful when ever i use them.Tel 01527
: 559547
: Cheers
: Pip
: --Previous Message--
: I have spoken to www.nrp-carbs.co.uk a few
: times and had spares from them, they are
: VERY knowlageable on these carbs and stock
: all spares and service kits, i will be
: sending my own carbs to them over the winter
: to be refurbed.well worth a call.
:
: --Previous Message--
: If its all thew way through, it must be a
: shared component.
: Could be a split diaphram.
: Could be a loose main jet.
: Could be general muck dirt in the float bowl
: that has been sucked up into the main body.
: Could be ruber seals on the float vale.
: Could be worn float valve tip.
:
: I would advise a full strip, inspection and
: rebuild.
:
: Pete F
:
:
: --Previous Message--
:
:
: --Previous Message--
: Steve,
:
: The Z1300 carbs are like no carbs on any
: other bike.
: You need to be sure thay are
: serviced/overhauled by someone who knows
: exactly what they are doing.
:
: If it is cylinders 3 & 4 then it will be
: the centre carb of the 3.
:
: Is the problem only on tick over or at low
: revs, or is it all the way thru the rev
: range.
:
: Regards
:
: Pete F
: Up North
:
: --Previous Message--
: just got a Z1300 it seems to be only running
: on 4 cylinders [the middle two exhaust pipes
: are cool. It has good compresion and spark.
: I suspect the carb is blocked - any ideas?
: Do you know anybody who can service them. I
: live in Essex.
:
: Regards, Steve.
:
: to pete f
:its all the way thru the rev range
:
:
:to pete f
:
: i feel your right but don t have the experience
: myself do you do repair work
: or know were i can take it
: regard steve
:
:
Message Thread:
« Back to thread