1250 SCALE MESSAGE BOARD
[ Post a Response | 1250 SCALE MESSAGE BOARD ]
I've Had Good Results With...
Posted by Robert Berg on 4/3/2018, 9:24 am, in reply to "Re: Barberpole stripes"
an airbrush. First I painted the white and then waited a day for it to dry thoroughly. I then applied masking tape cut into thing strips (as well as masking off the rest of the model). You don't need to press it down really hard onto the deck either. When ready to apply the red, just hold up the model with the bow pointing up and the airbrush at 90 degrees and give it a few quick shots. I get consistent width and clean lines. It even works over the deck clutter.
Hosted for FREE by Boardhost.
Create your own free message board!