to my opinion the best way to get ride of the wax af FUD is put the models into ligther fluid for 30 min and brush them carefilly with an old teeth brush.
Just let them dry and they will change colour into white.
Ther is NO need to primer them. Thats it...
: I recently purchased both the Type 2L tanker
: and its cousin the same hull fitted as an
: aircraft transport. All four models (2 of
: each) are the "Frosted Ultra
: Detailed" finish. I would appreciate
: some advice regarding how to prep this
: finish before painting (I plan to use
: acrylics) and how well these paints hold up
: as I would like to be able to do some
: masking without pulling up the paint.
: In passing, I think the models are nicely
: molded with the exception of the masts which
: are either missing or very much out of scale
: and should be replaced. Can't be too picky
: as they are fairly priced and represent
: models never before available.
« Back to index